WiiM Vibelink Amp 100W Power Amplifier ESS DAC Compatible WiiM Mini/Pro

  
) - Using digital inputs (optical/coax). ESS 9039Q2M DAC + TI TPA3255 amp chip - High-resolution decoding up to 192kHz/24-bit. Pure analog input (no ADC conversion) - Bypass digital conversion for a natural analog signal path. Seamless integration with WiiM streamers - Works with WiiM Mini, Pro, Pro Plus, and Ultra (requires separate streamer).

Inputs: RCA, Coaxial, Optical - Versatile connectivity for CD players, TVs, and external DACs. Anti-pop noise & 12V trigger - Prevents clicks/pops; Auto standby saves energy. Pure power amplifier (no streaming functions).

1x RCA (analog stereo), 1x Coaxial (digital), 1x Optical (digital). PFFB (post-filter feedback), anti-pop noise design. 12V trigger input, auto standby.

Unibody aluminum with copper heat pipe & graphene heatsink. 8.5" x 8.5" x 2.2 (estimate - see official specs). Output power measured at 1% THD, 1kHz. Actual may vary with source impedance and load. Compatible sources & system setup.

Ideal as a power amp for. WiiM Mini, Pro, Pro Plus, or Ultra (connect via optical or coax for best quality). Any preamp or DAC with analog RCA output.

CD players, TVs (via optical/coax), media players, turntables with phono preamp. This is a power amplifier only - it does NOT have Wi-Fi, Bluetooth, or streaming apps. Requires a separate preamp or streamer e. WiiM Pro to select sources and control volume. For 100W output, use optical or coaxial digital inputs. Do not connect to passive speakers with impedance below 4? Ensure speaker wires are properly terminated. What's in the box. WiiM Vibelink Amp (space gray).

4 x speaker banana plugs (screw-type). Does not include WiiM streamer, speakers, or digital coax cable.

Daily use & connection tips (replaces maintenance section). Connecting to a WiiM streamer : Use optical or coax cable (both included). Set streamer output to "digital" and Vibelink input to corresponding port. Using analog input : Connect preamp's RCA output to Vibelink's RCA input. The signal remains fully analog (no ADC). Speaker wiring : Use the included banana plugs or bare wire. Ensure positive/negative are not shorted. 12V trigger : Connect a mono 3.5mm cable from your preamp/streamer to the "12V Trigger In" to have the amp power on/off automatically. Auto standby : The amp enters standby after 15-20 minutes without signal. Wake by playing audio or pressing power button.

Anti-pop design : No action needed - the circuitry eliminates pops when changing sample rates or inputs. Ventilation : Place on a hard surface with at least 2 clearance around. The aluminum chassis with graphene heatsink is fan-less and silent. No routine maintenance required - keep vents dust-free; no firmware updates needed for basic amplification.

It is a dedicated power amplifier without streaming features. Pair it with any WiiM streamer or a traditional preamp. Message us for setup advice or if you need a digital coax cable.