Crown Pro XLi3500 2700w 2 Channel Power Amplifier XLI 3500+AT Microphone+Stand

  

Crown Pro XLi3500 2700w 2 Channel Power Amplifier XLI 3500+AT Microphone+Stand. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Crown Pro XLi3500 2700w 2 Channel PA Power Amplifier Professional Amp XLI 3500. (1) Audio Technica ATM410 Dynamic Cardioid Microphone w/ HI-Energy Neodymium Magnet. (1) Rockville RVMIC1 v2 Pro Tripod Microphone Stand Telescopic Mic Boom+Metal Joints.

The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. Crown Pro XLi3500 2700 Watt 2-Channel DJ/PA Power Amplifier.

Frequency Response: 20 Hz - 20 kHz. Damping Factor: 8 Ohms, 10 Hz to 400 Hz. Signal to Noise Ratio (A-Weighted): >100 dB. Crosstalk: -75 dB, -59 dB. Input Sensitivity: 0.775V or 1.4V.

Input Impedance: 20k Ohms, 10k Ohms. AC Line Voltage and Frequency Configurations: (+10%) 120V60 Hz; 220V50/60 Hz; 230-240V50/60 Hz. User selectable input sensitivity - 0.775V and 1.4V. Efficient forced-air cooling prevents excessive thermal buildup.

Electronically balanced RCA & XLR inputs; binding post and Speakon outputs. Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel. Protection against shorts, no-load, on/off thumps and radio-frequency interference. Product Dimensions: 19" x 3.5" 14.4 inches. How To Set Up Your RVMIC1 V2. How To Set Up a Dynamic Mic on Your RVMIC1 V2. How To Connect a Condenser to Your RVMIC1 V2. How To Set Up a Smartphone/Tablet Mount to Your RVMIC1 V2. How To Set Up The ISOBOX to Your RVMIC1 V2. All About Your RVMIC1 V2. Introducing the latest iteration of Rockville Audio's microphone stand, the Rockville RVMIC1 v2. This Pro Audio Tripod Microphone Stand is a step up from its predecessor, designed with both the seasoned musician and the passionate beginner in mind. The RVMIC1 v2 distinguishes itself with a new telescopic boom that provides remarkable versatility allowing a boom adjustment from 25" to 46.5" inches. Durability is key in any studio or stage equipment, and the v2 doesn't disappoint with its all-metal joints. These upgraded joints promise longevity and stability, so you can focus on your performance without worrying about wear and tear. Ergonomics is also enhanced with a new hand clutch featuring a more comfortable grip. This design ensures that adjustments are easy on your hands. Speaking of adjustments, the v2 boasts an adjustable height range from 36 inches to a towering 63 inches, catering to any user and any situation.

Compatibility is universal with the standard 3/8-inch threads and included 5/8-inch adapter, ensuring that the RVMIC1 v2 can accommodate a wide range of microphones. The foldable tripod design contributes to the stand's portability, while the included mic clip adds to its ready-to-use appeal. Steel construction underlines the stand's robust build, yet it remains lightweight at just 4.5 lbs.

This is a stand that promises to withstand the rigors of the road without adding burdensome weight to your gear. Cable management is also thoughtfully addressed with a cable guiding clip, allowing you to run cables along the stand neatly, maintaining a tidy stage or studio space. The dimensions of the stand's tubing are designed to offer strength and stability without excess bulk. And when the show is over, the stand collapses down to a compact 3 inches by 36 inches, making it a breeze to pack up. Finished in a sleek black color, the Rockville RVMIC1 v2 Pro Audio Tripod Microphone Stand is not only built to perform but also to fit seamlessly into any stage or studio aesthetic.

In a market flooded with options, the Rockville RVMIC1 v2 stands out by offering a blend of durability, flexibility, and portability, all without sacrificing quality or breaking the bank. Whether you're recording in a professional studio or performing live, this microphone stand is built to elevate your audio experience. Rockville RVMIC1 v2 Pro Audio Tripod Microphone Stand. V2 has a new telescopic Boom (25" to 46.5") (when collapsed its smaller then the old version, and when extended its significantly longer). V2 is upgraded with all metal joints (durable). Adjustable Height Range (36" to 63"). V2 has a new hand clutch with a more comfortable grip. Standard 3/8 Threads with 5/8 Adapter (Universal Compatibility). Cable Guiding Clip for running cables along the stand neatly. Leg Diameter: 0.75 inch.

Top Tube Diameter: 0.67 inch. Lower Tube Diameter: 0.83 inches. Boom tube size: 0.67 inch. Easy adjustment, just turn the clutch and you can raise or lower the stand.

Compact Dimensions When Collapsed (3" x 36"). We will not be undersold! We will match or beat any advertised price! Free AT8470 QuietFlexT stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8-16 threaded adapter; soft protective pouch. This cardioids dynamic workhorse is designed for smooth, natural vocal reproduction and low noise.

Equipped with a neodymium magnet for high output, and a multi-stage grille design for excellent protection against plosives, this super-durable microphone is built to stand up to life on the road. Tailored for smooth, natural vocal reproduction. Durable performance for professional applications.

Hi-ENERGY® neodymium magnet for improved output and transient response. Excellent off-axis rejection for minimum feedback. Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity. Quiet-FlexT stand clamp provides silent, flexible microphone positioning. Corrosion-resistant contacts from gold-plated XLRM-type connector.

Rugged, all-metal design and construction for years of trouble-free use. FREQUENCY RESPONSE: 90-16,000 Hz. OPEN CIRCUIT SENSITIVITY: -55 dB (1.7 mV) re 1V at 1 Pa.

WEIGHT: 233 g (8.2 oz). DIMENSIONS: 170.0 mm (6.69") long, 53.5 mm (2.11") diameter. OUTPUT CONNECTOR: Integral 3-pin XLRM-type. ACCESSORIES FURNISHED: AT8470 Quiet-FlexT stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8-16 threaded adapter; soft protective pouch. Detailed information of all products.

Lifetime Customer Service by Audio Technica product Experts. Guaranteed legitimate and authentic merchandise. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free.