You also have a 5 pin in and 4 pin out that you do not have to use, that allows you to have extra controls via a computer setup if that is your preference. So you can run it like a traditional amp or in a "higher tech" fashion.It powers on, passes clear audio, the selectors work, and the volume pots work and are not scratchy. It has spent its life in a pet free, smoke free, temperature controlled environment. It went straight from the box to the rack and is thus, very nice. It will be a great piece for someone. You get exactly what you see pictured. It weighs a 57 lbs before packing. The photo of the two racks show how these were set up for use.
These were never run hard. You get the single amplifier featured in the photos for the price shown.
Please read the specs and more information from Crown below. Designed from the ground up exclusively for the professional sound contractor, Com-Tech® offers incredible features, flexibility, and the best long-term value in commercial audio today.
The Com-Tech 10 Series amps offer the same features and performance of the original Com-Techs while delivering upgraded features to help make your job easier. In a profession where unplanned service calls quickly wipe out profits, the Com-Tech 10 Series is designed to be the most reliable amplifier you can install. Safe with all types of loads. With 8/4-ohm output, all Com-Techs are rated for 4 to 8 ohms in Dual mode, 8 to 16 ohms in Bridge-Mono mode, and 2 to 4 ohms in Parallel-Mono mode. With 70-volt output, rated loads vary among the different models for each dual/mono mode (see chart below for rated 70V).
Unique power supply allows channels to be independently operated in either 70-V or 8/4 ohm mode. Remote feature allows amplifier to be turned on and off from a remote location by adding an optional R. Crown's Grounded BridgeT design delivers large voltage swings without using easily stressed output-transistor configurations like conventional amplifiers.
The results are lower distortion and superior reliability. Patented ODEP ® (Output Device Emulation Protection) circuitry compensates for over- heating and overload to keep the amplifier working when others would fail. IOC ® (Input/Output Comparator) circuitry immediately alerts of any distortion exceeding 0.05%, providing dynamic proof of distortion free performance. Enhanced PIP2T (Programmable Input Processor) connector accepts new accessory modules that tailor the amplifier to suit specific applications.
Full protection from shorted, open and mismatched loads; general overheating; DC; high-frequency overloads, and full protection from internal fault are provided by our latest protection scheme: Quad-Mute. Crown IQ-PIP SMT Specs: (Free Software and Manual Download). SMT is a PIP2 input. ® (programmable input processor) and PIP2.
Also an IQ2-series component, it supports Crown's UCODE protocol and. Requires an IQ System® with an IQ2.
(universal code) enables users and. Third parties to develop custom software objects to control and monitor.SMT connects the amplifier to the Crown Bus of an IQ System so the amplifier can be controlled. Features, it offers several automation. Functions such as the ability to automatically turn on an amplifier channel (high voltage supply) when it is.
Needed and then turn it back off. When it is no longer needed. I used a high resolution camera to give you accurate pictures of its condition.
I have years of experience packaging delicate electronics, so rest assured, this will be packaged very well. I also use high quality packaging materials. Also, please check out the other items in my store. Thank you for looking and God bless!