Rack Mount QSC RMX 1450 Professional 2-Ch Stereo Power Amplifier 450WithCH TESTED

  
Rack Mount QSC RMX 1450 Professional 2-Ch Stereo Power Amplifier 450W/CH TESTED. No other accessories are included. Light surface rust that does not affect functionality at all. Condition is, tested and working, pulled from a working environment. Whatever the case, I'm here to make sure your experience ordering from me goes well.

The QSC RMX 1450 is a professional 2-channel (stereo) power amplifier from QSC's RMX Series, designed for live sound reinforcement, installed systems, touring, DJs, and performing musicians. It delivers reliable, high-value performance in a compact, road-worthy 2RU chassis. It is a Class AB amplifier known for its clean sound, strong 2-ohm capability, and rugged build with a high-current toroidal transformer. Power Output (Both Channels Driven). 8 ohms (EIA 1 kHz, 0.1% THD): 280W per channel.

4 ohms (EIA 1 kHz, 0.1% THD): 450W per channel (matches the "450W/CH" in the query). 2 ohms (EIA 1 kHz, 1% THD): 700W per channel. 8 ohms (EIA 1 kHz, 0.1% THD): 900W. 4 ohms (EIA 1 kHz, 1% THD): 1400W.

These ratings make it suitable for driving full-range speakers, monitors, or smaller subwoofers. Compact & efficient: 2 rack spaces (3.5" tall), less than 16" deep. High-current toroidal transformer for excellent 2-ohm performance and low noise. User-defeatable clip limiters (independent per channel) to reduce distortion. Selectable low-frequency filters (30 Hz or 50 Hz roll-off, or off) per channel - protects speakers and increases headroom.

Balanced inputs: XLR, 1/4 TRS, and barrier strip (per channel). Outputs: Touch-proof binding posts and Neutrik Speakon connectors. Front-panel controls: AC power switch and independent gain knobs.

Rear DIP switch for configuring filters, limiters, and bridging. Indicators: Power (green), Signal yellow per ch. Protection: Full short/open circuit, thermal, ultrasonic, RF; stable into reactive/mismatched loads; turn-on/off muting; AC coupling on this model. Cooling: Continuously variable-speed fan with back-to-front airflow. Signal-to-Noise Ratio (20 Hz-20 kHz): >100 dB (unweighted). Frequency Response: 20 Hz-20 kHz (+0/-1 dB); -3 dB points at 5 Hz and 50 kHz (LF filter bypassed). Rated power): 1.15 V (+3.4 dBu). Voltage Gain: 40x (32 dB). Input Clipping: 10 Vrms (+22 dBu). Power Requirements: 100/120/230 VAC, 50-60 Hz (factory configured). Dimensions (H x W x D): 3.5" x 19" x 15.9 (rack mount to rear ears).