Crown XLS2000 2100w PA amplifier. Professional audio, subwoofer

650w x 2 at 4 ohms. 1050w x 2 at 2 ohms. 1300w x 1 bridged at 8 ohms.

2100w x 1 bridged at 4 ohms. This amplifier has RCA inputs so it can be used in home audio if you prefer. Makes a great subwoofer amp with built in high pass, low pass and band pass filters! Includes power cord and owners manual. Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability.

Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

The XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability. This high-performance line consists of four models each providing enormous power and flexibility thanks to the integrated DriveCore Technology, PureBand Crossover System and Peakx limiters.

And weighing in at only 10 lbs or less, they provide the ultimate in lightweight portability. Generating chest-thumping lows and crystal clear highs, the four models in the series the XLS1000, XLS1500, XLS2000, and XLS2500 are engineered to meet any demanding audio requirements reliably and within budget. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series. They are a powerful argument for performance, flexibility, and value!

Class D amplifiers are notable for extraordinarily high efficiency and being well suited for driving difficult reactive loads such as subwoofers. However, their performance can suffer impaired performance on marginal and unstable AC line supplies. To overcome this obstacle, Crown engineers developed DriveCore Technology a proprietary hybrid analog-digital integrated circuit (IC) developed with Texas Instruments that drives the "front end" of the Class D output stage. Over 60 years of Crown's design knowledge and experience went into the development of this technology resulting in truly remarkable benefits.

DriveCore Technology provides an extremely wide-tolerance with regards to sagging or "dirty" AC line conditions providing consistent performance without affecting audio quality. This means that your performance will not be compromised by fluctuating generator power or overloading by lighting rigs, backline gear, etc. In addition, DriveCore Technology's patented feedback and PWM modulation circuits enable fast recovery on peak transients, accurate reproduction of low-level detail, and precise tracking of low-frequencies at high power levels for maximum subwoofer output. This advanced power supply is highly efficient and optimized for maximum power transfer from the AC line through the Class D output stage to the loudspeakers.

A benefit to this is substantial weight reduction when compared to older 60Hz transformer-based power supplies. All four models in the line weigh 10 pounds or less with no compromise in performance.

This makes the XLS Series the benchmark for high performance lightweight portability. The PureBand Crossover System in the XLS Series adds an enormous amount of flexibility and performance to any system. With this system, the crossover frequency is completely variable allowing the choice of any crossover point between 50Hz and 3kHz on 1/12 octave centers. The use of 4th order Linkwitz-Riley filters provides steep slopes for a seamless transition between high and low drivers.

And with four crossover modes to choose from providing the ultimate in flexibility, all of your system needs are covered. Crossover Mode (CH1=LPF, CH2=HPF) When chosen, this mode enables a LowPass Filter on Channel 1 and a HighPass Filter on Channel 2 at the frequency chosen. LowPass Mode (CH1=LPF, CH2=LPF) When chosen, this mode enables a LowPass Filter on both Channel 1 and Channel 1 at the frequency chosen. HighPass Mode (CH1=HPF, CH2=HPF) When chosen, this mode enables a HighPass Filter on both Channel 1 and Channel 2 at the frequency chosen. Bridge Mode (LPF or HPF) When the amplifier is put into Bridge-Mono, you are still able to use the crossover system and employ either a LowPass Filter or HighPass Filter at the frequency chosen. All of the PureBand Crossover System settings can be fully configured quickly and easily from the front panel using the intuitive LCD interface. Peakx limiters provide the ultimate in performance and protection for your entire system. This advanced algorithm was specifically developed and tuned to work with this amplifier and power-supply to achieve higher SPL will less audible artifacts.

This means less distortion, less shutdowns, and maximum safe power delivered to your speakers. The Peakx limiters can be easily turned on or off by channel right from the front panel eliminating the need to be digging around in the back of the dark rack. XLS High Performance, Lightweight Class D amp weighs less than 11 lbs. Integrated PureBand Crossover System for better performance and control. Peakx Limiters provide maximum output while protecting your speakers.

XLR, 1/4, RCA inputs provide outstanding flexibility. Efficient forced-air fans prevent excessive thermal buildup. Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs. Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel. Sensitivity1.4Vrms (for full rated power at 4 ohms).

Frequency Response (at 1W, 20 Hz - 20 kHz)+ 0 dB, -1 dB. Signal To Noise Ratio (A-weighted)>103 dB (rated as dBr to full rated 8 ohm power output).

Intermodulation Distortion(60 Hz and 7 kHz at 4:1, from full rated output to -30 dB) 200. Crosstalk (below rated power) 20 Hz to 1 kHz>85 dB, >55 dB.

Input Impedance (nominal)20k ohms balanced, 10k ohms unbalanced. Load Impedance2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available(+/- 10%) 120VAC 60 Hz, 100 VAC 50/60 Hz, 220 and 240VAC 50 Hz. Dimensions19" x 3.5" x 10.7 (48.3cm x 8.9cm x 27.2cm).

Weight10.8 lbs (4.9 kg). The item "Crown XLS2000 2100w PA amplifier. Professional audio, subwoofer" is in sale since Tuesday, April 7, 2020.

This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers". The seller is "olympictransportation" and is located in Melville, Saskatchewan.

This item can be shipped to Canada, United States.

Brand: Crown
Model: XLS2000
Number of Channels: 2
RMS Power: 2000 W
Type: Power Amplifier
Form Factor: Rack Mountable
Features: Crossover