(2) Rockville RSG15.24 Dual 15 3000w 3-Way Pro Audio Speakers+Power Amplifier

  

(2) Rockville RSG15.24 Dual 15 3000w 3-Way Pro Audio Speakers+Power Amplifier. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Rockville RPA12 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp. (2) Rockville RSG15.24 Dual 15 3000 Watt 3-Way 4-Ohm Passive DJ/Pro Audio Speaker.

(2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper. How to Set Up Your RPA12, RPA14, and RPA16. Stereo 8 Ohm: 2 x 500W. Stereo 4 Ohm: 2 x 700W. Bridged 8 Ohm: 1 x 1400W.

Stereo 8 Ohm: 2 x 2000W Max. Stereo 4 Ohm: 2 x 2500W Max. Bridged 8 Ohm: 1 x 5000W Max.

Combo jack (XLR and ¼) A & B inputs. Banana binding post speaker output.

XLR output to connect another amplifier or powered sub. Rockville RPA12 5000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier. LCD displays volume in dB per channel and operating temperature. Built in limiter protects your speakers from distortion and clipping.

Bridged mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration. Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s).

Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls.

Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles. Built-in variable high velocity quiet cooling fans.

Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (15A, 250V).

Input Impedance: 10K Ohm Balanced. Input signal voltage: 660mV - 1.5V. Damping factor: (100Hz, 10w, 4 ohms): 40.8. Effective damping factor (100Hz, 10w, 4 Ohms) 1.08. Output impedance at speaker terminals: 0.09803 Ohms.

Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.11%. Signal to Noise Ratio: > 100dB. IMD 60Hz & 1kHz, 4:1. SLEW RATE (input filter limited) : 40v/uS.

Power Requirements: 120V / 50-60Hz. Dimensions: 19.09 x 16.93 x 3.35 inch. How to Set Up Your Rockville RSG Speakers. We are proud to introduce to you the Rockville RSG series of speakers.

These are affordable speakers with high-end performance; specially built for DJ's as well as professional audio applications. The goal was to create a line of passive DJ speakers that were double as good as the competition but cost half as much. The Rockville RSG15.24 speaker system features two high quality 15 low frequency woofers with three electronic, high-efficiency piezo bullet tweeters and one high efficiency piezo compression horn tweeter that provide a true full-range of sound. This speaker produces an incredible amount of power.

3000 Watts peak, 2000 Watts Program Power, and 1500 Watts RMS Power. With 80 Oz magnets, you can be sure these speakers will produce the power you expect out of them. Constructed using thicker than standard, high-quality, high-density materials our cabinets are strong and rigid yet light weight enough to make travel and set-up a breeze. Built-in ergonomic, recessed handles give these speakers additional carrying ease, for all you DJ's who travel from party to party. The sturdy custom-molded steel grill combined with corner protectors, pre-mounted rubber isolating feet, and durable aviation-grade black carpet make these speaker cabinets tough enough to withstand every day abuse.

Engineered from the ground up; the tapered trapezoidal shape produces wide, clear sound dispersion that will reproduce your program source materials loudly with accuracy and musical transparency. Multiple inputs, typically found on high-end speakers are standard equipment on the Rockville RSG15.24. Two input connectors, ¼ IN/OUT and speakON connection make the Rockville RSG-15.24 able to integrate in to any existing amplification system. Additional installation flexibility is available via the reinforced.

So if you are looking for a top-of-the-line quality DJ speaker that is rugged, can handle lots of power, and sounds incredible then the Rockville RSG15.24 has got you covered. Rockville RSG-15.24 Carpeted Passive Loudspeaker.

(2) Dual 15 Pro Audio Woofer. (3) Piezo 3 Bullet Tweeters. (1) High Efficiency Piezo Compression Horn. 2.5 High Temperature Aluminum Voice Coil. Frequency Response: 35Hz - 22 kHz.

Dimensions: (20.5+13.2)x13.8x46in. Construction: Top quality MDF - Stapled, Bonded & Braced. About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value.

All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands.

All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production.

During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. Video of RCSS SPEAKON CABLES. All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable.

There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum).

CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently.

A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further.

Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use. Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable. 100% Copper Conductors for Lower Resistance. Black PVC Jacket for Both Durability and Flexibility. Intended for High-Current Applications Only, Not Line-Level Signals. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a.

To replace the item for a brand new one. All replacements and exchanges are free. Item Code: RPA12+(2) RSG15.24+(2) RCSS1425.