Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp

Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp. THE PRODUCT WAS TESTED AND IS WORKING LIKE NEW! Stereo 8 Ohm: 2 x 1,000W. Stereo 4 Ohm: 2 x 1,500W.

Bridged 8 Ohm: 1 x 3000W. Stereo 4 Ohm: 2 x 5,000W Max. Bridged 8 Ohm: 1 x 10,000W Max.

Combo jack (XLR and ¼) A & B inputs. Banana binding post speaker output. XLR output to connect another amplifier or powered sub. Rockville RPA16 10,000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier.

LCD displays volume in dB per channel and operating temperature. Built in limiter protects your speakers from distortion and clipping.

Bridged mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.

Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles. Built-in variable high velocity quiet cooling fans.

Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (25A, 250V).

Input Impedance: 10K Ohm Balanced. Input signal voltage: 660mV 1.5V. Damping factor: (100Hz, 10w, 4 ohms): 36.5. Effective damping factor (100Hz, 10w, 4 Ohms) 1.08. Output impedance at speaker terminals: 0.10975 Ohms.

Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.6%. Signal to Noise Ratio: > 100dB. IMD 60Hz & 1kHz, 4:1.

SLEW RATE (input filter limited) : 40v/uS. Power Requirements: 120V / 50-60Hz.

Dimensions: 19.09 x 16.93 x 3.35 inch. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free.

The item "Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp" is in sale since Wednesday, June 17, 2020. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers". The seller is "audiosavings" and is located in Inwood, New York.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

MPN: RPA16
Number of Channels: 2
Country/Region of Manufacture: China
UPC: 613817160999
Model: RPA16
RMS Power: 3000 W
Form Factor: Rack Mountable
Brand: Rockville
Instrument: Amplifier
Type: Power Amplifier