By using the Step-Up procedure it is now possible to increase the output power without having to change amplifier. Read more on the K Series Step-Up procedure here. 2-Channel High Performance Power Amplifier.The K20 impresses with up to 18,000 W in a single rack space, making it probably the most powerful amplifier at its size, and definitely the most powerful model within the K Series, the most advanced line of power amplifiers from Powersoft. Ideal for subwoofers requiring relatively high continuous power and ample headroom, the K20 is the unique result of smart design, attention to sound quality, and extremely high efficiency with reliability, portability, and adaptability in mind. In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size. Fully digitally controlled and with a serial PC communication port as standard, the K20 is also available with KDSP board and KAESOP Ethernet/AES3 interface: the K20 DSP+AESOP amounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft's Armonía Pro Audio Suite. Advanced switch-mode worldwide operating power supply technology for high performance and compact size. Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range. Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers. Protections Fully protected circuit design with. Ac protection: shut down power supply when AC mains voltage is outside operating range.
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output. DC protection: protects against infrasonic signal at the outputs.
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals. Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset. Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output. Thermal protection: output stages operating temperature up to 80 °C (176 °F). Temperature controlled continous variable speed fan, front to back airflow.
Temperature forecast with LCD traced historical behaviour. Fixed frequency switchmode output stage for high grade sound accuracy. Compact size - all models only 1 RU for reduced rack cost and space.
Combo XLR/6.3mm jack Neutrik input connectors with link capability. Comprehensive-user friendly front panel display menu. Built-in defeatable clip limiters for each channel. Defeatable gate selection for each channel.User selectable maximum output power for each channel. User selectable maximum mains current draw. Lockable set-up by user selectable access key code. Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring. Hardware monitor available for fast local diagnostic. Load impedance measurement / display for each channel. Output power measurements / display for each channel. Mains voltage and current measurements / display. Downloadable log file of functional fault events with time related trace. Smart Card settings, parameters and upgrades functionality. Analog Devices SHARC® DSP architecture. Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters. Delay up to 1 s for time alignment. Active DampingControl for cable compensation. Power limiter (TruePower, RMS voltage, RMS current) + Peak Limiter. Control and monitoring through Armonía Pro Audio Suite. Max output voltage / current. Universal, regulated switch mode with PFC (Power Factor Correction). 100-240 V ±10%, 50-60 Hz. 90 V - 264 V.
0° - 45° C - 32° - 113° F. > 110 dB (20 Hz - 20 kHz, A weighted). < 0.5% from 1 W to full power (typically < 0.05%).
< 0.5% from 1 W to full power typically. Dual 24 bit 96 kHz Tandem® architecture with 127 dBA of dynamic range and THD. Dual 24 bit 96 kHz Tandem® architecture with 122 dBA of dynamic range and THD.8 MB (RAM) plus 2 MB flash for presets / 50 stored locally + 150 stored on Smart Card. 6.0 ms fixed latency architecture. Three layers (PEQ, raised cosine, shelving), 32 filters each + group filters, up to 256 filters total. 16 fully parametric filters per channel, IIR: peaking, hi/lo-shelving, hi/lo-pass, band-pass, band-stop, all-pass. Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR), hybrid (FIR-IIR). Up to 4 s on input section; up to 32 ms per output, sample-by-sample stepping. Power limiter, TruePower, RMS voltage, RMS current + Peak limiter. 2 x LED bar - Signal level and over-temperature protection 4 x Push-button - Setting operating parameters 1 x Display - Settings and monitoring 1 x Power switch. 1 x AMP CPC 45A connector - 45 A max (region-specific power cord provided). 2 x Combo Jack/XLR-F - Signal input 1 x Analog/Digital input - Switchable Analog line/AES3 digital input on channel 2. 2 x speakON - Neutrik NL4MD. 2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only) 2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only) 1 x Rj45 socket - RS485 data connection (non-DSP version). 1 x Push-button - Link channel pair 1 x Push-button - Toggle ANALOG input/AES3 input on selected connector. Dimensions (L x H x W). 483 mm x 44.45 mm x 475 mm (19.0 in x 1.8 in x 18.7 in). 12 kg (26.5 lb). The item "Powersoft K20 2-Channel Pro DJ 18000W Live Sound Power Amplifier Rack Mountable" is in sale since Tuesday, May 16, 2017. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers". The seller is "vipaudio215" and is located in Brooklyn, New York. This item can be shipped to United States.