QSC PLX-3602 Pro Audio Power Amp. Massive 2 x 1800watts, Bridged 3600watts. The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3602 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. The "02" models (PLX1802, PLX2502, PLX3102 and PLX3602) are the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required.
These models feature built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.
Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.PowerLight switchmode technology replaces a large, heavy AC transformer typically 20 lbs. / 9 kg with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean. PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.
The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality. Very light weight ("02" models, 21 lbs/9.5 kg, "04" models 13 lbs/5.9 kg). Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged. Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting.
02 models also feature bridge and parallel mode LED indicators. Speakon® NL-4 output connectors provide a positive-locking speaker connection.
Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers. 21-position front-panel gain controls for precise, repeatable amplifier adjustment. Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation. Patented PowerLight power supply technology with other patents pending. Speakon® NL4 and binding post outputs.100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover. Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage. STEREO MODE , Both Channels Driven. FTC 20 Hz - 20 kHz 0.05% THD.
EIA 1 kHz 0.1% THD. 2 ohms EIA 1 kHz 1% THD. 20 Hz-20 kHz 0.1% THD.
4 ohms 1 kHz 1% THD. Signal to Noise (20 Hz - 20 kHz). 1/8 rated power, 20 Hz-20 kHz.
Full rated power, 20 Hz-20 kHz. 20 Hz-20 kHz, -0.5 dB. Variable-speed fan, rear-to-front air flow.
3-pin XLR and 1/4 TRS balanced. Neutrik® NL4 Speakon® and Touch-proof binding posts. (Both channels available on Ch 1 NL4 connector). Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic). Detented Gain Attenuator: 0 to dB.
Signal (-35 dB): Green LED. Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection.
Stable into reactive or mismatched loads. On/off muting, DC-fault power supply shutdown.
Depth, Rack mounting surface to rear panel. 3.5 (8.9 cm) 2 rack spaces.
12.8 (32.6 cm). 14.875 (37.9 cm). I mostly use hard and soft foam to pack. Some times bubble wrap depending on what it is.Please checkout my other auctions for more Professional. Audio, Video & Stage Lighting Equipment From Around Central Florida. The item "QSC PLX 3602 Pro Audio Power Amp Massive 2 x 1800w, Bridged 3600w 21 Pounds 220v" is in sale since Sunday, June 9, 2019. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers". The seller is "member5850048" and is located in Davenport, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Barbados, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Luxembourg, Martinique, Maldives, Nicaragua, Pakistan, Paraguay, Reunion, Uruguay.