Pro Power Amplifier

Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped


Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped
Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped

Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped   Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped

DECENT COSMETIC CONDITION (HOWEVER SERIAL # SCRATCHED IN FRONT FACE SEE PIC). Some electrolytic capacitors have been replaced with Elna and Nichicon capacitors, DC offset and Bias have been adjusted to factory specs and solder joints re-soldered. Unit serviced to new condition /ALL KNOBS FUNCTIONS CLEANED. And if you do, too, you'll find a faithful friend in the new SA-9500; one of the most musically minded pre/main stereo amplifiers we've engineered.

It combines massive stereo output power with a delicacy of transparency; a rare blend in these days of lots of power at any cost. In other words, we haven't simply beefed up the power section at the expense of the tonal quality, frequency response or other aspects so important to the sound of a high fidelity component. The Pioneer SA-9500 does deliver an unusually large continuous power output of 80 watts per channel, min RMS at 8 ohms from 20 Hertz to 20,000 Hertz with no more than 0.1% total harmonic distortion, but it also ensures that even when operated at low volumes the performance retains a crisp, sparkling clarity. The dynamic response and reliability of the SA-9500 are matched with a flexibility of use you'll rarely find in this price range. Tone control versatility, for instance: both the bass and treble sections have 3-position turnover selection and there's a tone on/off switch for "flat" response at a touch. And we're sure that if you do, too, you'll believe in the all-new SA-9500. Power output: 80 watts per channel into 8 (stereo). Frequency response: 7Hz to 40kHz. Total harmonic distortion: 0.005%. Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line). Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line). Output: 150mV (line), 2V (Pre out). Semiconductors: 2 x FET, 54 x transistors, 26 x diodes. Dimensions: 420 x 165 x 403mm.

The item "PIONEER SA-9500 STEREO POWER AMPLIFIER PRO SERVICED PART RECAPPED" is in sale since Thursday, December 10, 2020. This item is in the category "Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps". The seller is "stereomax5000" and is located in Roxboro, Quebec.

This item can be shipped worldwide.

  1. Model: SA-9500
  2. Country/Region of Manufacture: Japan
  3. Brand: Pioneer
  4. Type: Power Amplifier
  5. Featured Refinements: Pioneer SA


Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped   Pioneer Sa-9500 Stereo Power Amplifier Pro Serviced Part Recapped